Online Session Locator

Find Sessions

Sun. June 26, 2011 2:00 PM to 5:00 PM
Room 202, Vancouver International Conference Centre
Session Description

Free ticketed event
Tablet PCs use their inherent ability to accept electronic ink (e-ink) input to enable users to interact with the device in a more natural way. This is especially important in learning environments where the user needs to focus on subject material rather than on the device used to record or store the subject information. Using Tablet PCs, instructors are able to increase their effectiveness by making more dynamic presentations and by including active exercises into their classroom environments. Tablet PCs also facilitate better and more natural note-taking by students and easier after-class review ... (continued)

Speaker
  1. Prof. Joseph G. Tront

    Virginia Tech

    Joseph G. Tront
    W.S. Pete White Chair and
    Professor of Electrical & Computer Engineering
    Virginia Tech University

There are currently 24 registrants interested in attending
Workshop · Sponsored Sessions
Sun. June 26, 2011 2:00 PM to 5:00 PM
Room 203, Vancouver International Conference Centre
Session Description

Ticketed event: $40.00
This ticketed event is $30 advance registration and $40 on-site registration. Waterloo Cases in Design Engineering (WCDE) has been established to enhance the teaching and learning of engineering design by developing and implementing cases studies throughout the faculty of Engineering curriculum at the University of Waterloo (Waterloo). Case studies are available to all educational institutions for use in their courses, as well. The purpose of this workshop is to have participants learn how to implement cases studies and to demonstrate how effective they can be as an active learning methodology.

Speakers
  1. Prof. Oscar G Nespoli P.Eng.

    University of Waterloo

    Lecturer, Department of Mechanical and Mechatronics Engineering
    University of Waterloo

  2. David Effa

    Design Engineer (EIT) and Case Developer, Department of Mechanical and Mechatronics Engineering
    University of Waterloo

There are currently 4 registrants interested in attending
Workshop · Student Division
Sun. June 26, 2011 2:00 PM to 5:00 PM
Room 204, Vancouver International Conference Centre
Session Description

Free ticketed event
The agenda will be as follows. Introduction and activity to form small groups/build community - The purpose of this introduction is to define the goals and objectives for the session. An activity will follow to form small groups of students and faculty and create an atmosphere for later discussion. What is the Ph.D. Consortium in Engineering Education? – Facilitators will lead a discussion on the conversation that has lead the development of the Ph.D. Consortium thus far. Results of a graduate student needs assessment completed for the 2010-2011 academic year will be presented by members of the SCC P ... (continued)

There are currently 34 registrants interested in attending
Workshop · Technological and Engineering Literacy/Philosophy of Engineering Division
Sun. June 26, 2011 2:00 PM to 5:00 PM
Room 205, Vancouver International Conference Centre
Session Description

Free ticketed event
This hands-on session will help participants to develop a minor or certificate in engineering studies for non-engineering students. The purpose of these minors or certificates is to provide a meaningful understanding of technology and engineering for students who are not planning on working as engineers but who expect to be working in technology-related fields or industries. Key factors in attracting and promoting programs to non-engineers will be described. Participants will be able to create an outline of a program structure consistent with their institutional environment. Strategies for obtaining ... (continued)

Speaker
  1. Dr. John Krupczak Jr

    Hope College

    John Krupczak is Professor of Engineering at Hope College in Holland, Michigan. He has been active in efforts to promote technological literacy and has experience in developing courses and minors in this area. He is currently serving as chair of the Technological Literacy Division.

There are currently 17 registrants interested in attending
Sun. June 26, 2011 2:00 PM to 5:00 PM
Room 206, Vancouver International Conference Centre
Session Description

Free ticketed event
Everyday Examples in Engineering (E3s) are fun, familiar and engaging to students. They are an effective way to demonstrate and teach concepts in fundamental engineering, math, and physics courses. In this three-hour workshop, participants will learn about E3s and the impact of E3s on student interest and achievement (one hour) and will work in small groups (two hours) to develop their own examples for use in engineering, math, and physics courses that first- and second-year engineering students take. The workshop is free, with sponsorship provided by the National Science Foundation’s ENGAGE proje ... (continued)

Speakers
  1. Ms. Susan Staffin Metz

    Stevens Institute of Technology (School of Engineering and Science)

    Stevens Institute of Technology

  2. Dr. Patricia B. Campbell

    Campbell-Kibler Associates

    Campbell-Kibler Associates, Inc.

  3. Dr. Laura Bottomley

    North Carolina State University

    North Carolina State University

  4. Jennifer Weisman

    Campbell-Kibler Associates, Inc.

    Campbell-Kibler Associates, Inc.

There are currently 36 registrants interested in attending
Business · College Industry Partnerships Division
Sun. June 26, 2011 2:30 PM to 4:00 PM
Room 210, Vancouver International Conference Centre
Session Description

This is the CIP Board Meeting.

There are currently 10 registrants interested in attending
Business · Council of Sections
Sun. June 26, 2011 2:30 PM to 4:00 PM
Room 220, Vancouver International Conference Centre
Session Description

How can ASEE better serve its Canadian members? The Council of Sections invites Canadian conference participants to join a discussion of issues and opportunities to strengthen the ASEE network on the section and national level. How can we share and expand the unique benefits of our two systems? What do Canadians see as ASEE’s relevance? Come and bring your questions and concerns. This session should be of interest to Canadian members, members and officers of sections with Canadian members, and other interested conference attendees.

There are currently 7 registrants interested in attending
Business · Educational Research and Methods Division
Sun. June 26, 2011 2:30 PM to 4:00 PM
Room 201, Vancouver International Conference Centre
Session Description

This executive session is for members of the FIE Steering Committee only. During this business meeting, the Committee will set the agenda for upcoming FIE conferences.

Moderated by:

Jim Morgan, Texas A&M University
Archie Holmes, University of Virginia
Reid Bailey, University of Virginia

There are currently 5 registrants interested in attending
Business · Engineering Design Graphics Division
Sun. June 26, 2011 2:30 PM to 4:00 PM
Room 207, Vancouver International Conference Centre
Session Description

This is the annual business meeting of the officers of the Engineering Design Graphics Division. All members of the division are welcome.

There are currently 8 registrants interested in attending
Business · Engineering Technology Division
Sun. June 26, 2011 2:30 PM to 4:00 PM
Room 223, Vancouver International Conference Centre
Session Description

This meeting is for those members of the Engineering Technology Division who want to discuss topics of mutual interest.

There are currently 23 registrants interested in attending
Business · Pre-College Engineering Education Division
Sun. June 26, 2011 2:30 PM to 4:00 PM
Room 110, Vancouver International Conference Centre
Session Description

All members of the K-12 and Pre-College Division and those interested in becoming members are invited to come learn about and contribute to the activities and direction of the division.

There are currently 32 registrants interested in attending
Business · ASEE Headquarters
Sun. June 26, 2011 3:30 PM to 4:30 PM
Room 217, Vancouver International Conference Centre
Session Description

This is the meeting of the MSP SIG for Engineering.

Social · ASEE Board of Directors
Sun. June 26, 2011 4:00 PM to 5:30 PM
Coal Harbor Suite, Pan Pacific Vancouver Hotel
Session Description

This is the Greet the Stars First-Timer's Orientation. New ASEE members and first-time conference attendees will gain an overview of the conference and ASEE from the Society's president and other leaders at this complimentary gathering. All newbies are welcome!

There are currently 104 registrants interested in attending
Business · Professional Interest Council
Sun. June 26, 2011 4:30 PM to 6:00 PM
Room 208, Vancouver International Conference Centre
Session Description

This is a business meeting for the Professional Interest Council I.

There are currently 4 registrants interested in attending
Business · Professional Interest Council
Sun. June 26, 2011 4:30 PM to 6:00 PM
Room 209, Vancouver International Conference Centre
Session Description

This is a business meeting for the Professional Interest Council II.

There are currently 5 registrants interested in attending
Business · Professional Interest Council
Sun. June 26, 2011 4:30 PM to 6:00 PM
Room 212, Vancouver International Conference Centre
Session Description

This is a business meeting for the Professional Interest Council III.

There are currently 5 registrants interested in attending
Business · Professional Interest Council
Sun. June 26, 2011 4:30 PM to 6:00 PM
Room 213, Vancouver International Conference Centre
Session Description

This is a business meeting for the Professional Interest Council IV.

There are currently 3 registrants interested in attending
Business · Professional Interest Council
Sun. June 26, 2011 4:30 PM to 6:00 PM
Room 214, Vancouver International Conference Centre
Session Description

This is a business meeting for the Professional Interest Council V.

There are currently 3 registrants interested in attending
Social · ASEE Board of Directors
Sun. June 26, 2011 6:00 PM to 9:00 PM
West Ballroom CD, Vancouver International Conference Centre
Session Description

Ticketed event: Picnic: Registered Guest or Attendee - $45.00
Picnic: Unregistered Guest - $55.00
Picnic: Child (6-12) - $30.00
$35 for registered attendees, pre-reg, $45 on-site. $45 for un-registered attendees, $55 on-site . $20 for children 6-12 years old. See old friends and colleagues and make some new ones at the 2011 ASEE Picnic! Join us as we kickoff ASEE Annual Conference 2011 at the beautiful Vancouver International Convention Centre. You’ll enjoy delicious, local cuisine, drinks, and traditional First Nations entertainment. You won’t want to miss experiencing Canadian culture overlooking the Vancouver harbor. Due to the generous participation of our sponsors, the ASEE Picnic tickets are subsidized by over 50%! We are delighted to be able to offer our attendees these discounts; we hope to see you there.

There are currently 700 registrants interested in attending
Hq · ASEE Headquarters
Mon. June 27, 2011 7:00 AM to 5:00 PM
Exhibit Hall C, Vancouver International Conference Centre
Session Description

Registration for pre-registered attendees, and on-site registration. Located in the Exhibit Hall C.

There are currently 17 registrants interested in attending
Business · ASEE Headquarters
Mon. June 27, 2011 7:00 AM to 8:30 AM
Room 218, Vancouver International Conference Centre
Session Description

This is a meeting for members of the ASEE Project Board.

There are currently 2 registrants interested in attending
Mon. June 27, 2011 7:00 AM to 8:30 AM
107/108, Vancouver International Conference Centre
Session Description

Student retention is an important issue that every department and college must face, especially as more states link their appropriations to student retention rates (and shift from entering enrollments). This session will feature six different efforts from five different institutions that contribute to the retention of students as well as special efforts to retain students of differing demographics (gender, race / ethnicity, first generation college students, etc.). It is valuable to note the creative approaches that most enthuse students to continue to study chemical engineering and connect with th ... (continued)

Papers Presented
  1. Special Session: What Works to Retain Students in Chemical Engineering Programs [view paper] Adrienne R. Minerick (Michigan Technological University), Donald P. Visco (Tennessee Technological University), Susan M. Montgomery (University of Michigan), Daina Briedis (Michigan State University), Neeraj Buch (Michigan State University), Jon Sticklen (Michigan State University), Colleen A. McDonough (Michigan State University), S. Patrick Walton (Michigan State University), Amanda M. Portis (Michigan State University), Eldred H. Chimowitz (University of Rochester), Willie (Skip) E. Rochefort (Oregon State University), Keith L. Levien (Oregon State University), Nimir Elbashir (Texas A&M University), Jennifer Condit (University of Rochester ), and Stephen Lindeman (Affiliation unknown)
There are currently 14 registrants interested in attending
Business · Chemical Engineering Division
Mon. June 27, 2011 7:00 AM to 8:30 AM
Room 110, Vancouver International Conference Centre
There are currently 9 registrants interested in attending
Business · Civil Engineering Division
Mon. June 27, 2011 7:00 AM to 8:30 AM
Room 118, Vancouver International Conference Centre
Session Description

Annual Meeting of the Civil Engineering Division Executive Board and guests

There are currently 13 registrants interested in attending
Technical · Computers in Education Division
Mon. June 27, 2011 7:00 AM to 8:30 AM
Room 111, Vancouver International Conference Centre
Session Description

This session features a miscellany of topics that are appropos to the Computers in Education Division.

  1. Moderated by Dr. Melissa A. Pasquinelli
Papers Presented
  1. Topic Maps Used to Present Interrelationships in Dynamic Linear Systems [view paper] Erik Cheever (Swarthmore College) and Ames Bielenberg (Swarthmore College)
  2. Excel Add-ins for Gas Dynamics Courses [view paper] Robert P. Taylor (University of Alabama) and Keith A. Woodbury (The University of Alabama)
  3. Using GEARSET to Promote Student Awareness of Learning Objectives [view paper] David R. Bowman (Clemson University) and Elizabeth A. Stephan (Clemson University)
  4. A Game-based Laboratory for Gear Design [view paper] Yizhe Chang (Stevens Institute of Technology), El-Sayed Aziz (Stevens Institute of Technology), Dr. Sven K. Esche (Stevens Institute of Technology), and Constantin Chassapis (Stevens Institute of Technology)
  5. Integrating Computing into Thermodynamics: Lessons Learned [view paper] Melissa A. Pasquinelli (North Carolina State University) and Jeff Joines (North Carolina State University)
There are currently 18 registrants interested in attending
Technical · Design in Engineering Education Division
Mon. June 27, 2011 7:00 AM to 8:30 AM
Room 202, Vancouver International Conference Centre
Session Description

Planning, execution, and assessment of efforts to enhance capstone (senior) design education.

  1. Moderated by Dr. Gregg Morris Warnick
Papers Presented
  1. Lessons Learned from Providing Intellectual Property to Sponsoring Companies when Recruiting Capstone Projects [view paper] Gregg M. Warnick (Brigham Young University) and Robert H. Todd (Brigham Young University)
  2. An Optimization Routine for Assigning Students to Capstone Project Groups [view paper] Peter L Schmidt (University of North Carolina, Charlotte), Daniel Hoch (University of North Carolina, Charlotte), Nabila A. Bousaba (University of North Carolina, Charlotte), William F. Heybruck (University of North Carolina, Charlotte), Deborah L Sharer (University of North Carolina, Charlotte), Valentina Cecchi (University of North Carolina at Charlotte), S. Gary Teng (University of North Carolina at Charlotte), and Elizabeth Sharer (Francis Marion University)
  3. Best Practices for Faculty Mentorship of Capstone Design Projects [view paper] Gregory K Watkins (California State University, Chico)
  4. Differences between Student and Faculty Expectations for a Robotics Capstone Design Project [view paper] Kevin M. Sevilla (Virginia Tech), Maura J. Borrego (Virginia Tech), and Alexander Leonessa (Virginia Tech)
  5. Instructional Methodology for Capstone Senior Mechanical Design [view paper] Xiaobin Le (Wentworth Institute of Technology ), Anthony William Duva (Wentworth Institute of Technology), Richard L. Roberts (Wentworth Institute of Technology), and Ali R. Moazed (Wentworth Institute of Technology)
There are currently 45 registrants interested in attending
Social · Educational Research and Methods Division
Mon. June 27, 2011 7:00 AM to 8:30 AM
East Building - Room 3, Vancouver International Conference Centre
Session Description

Ticketed event: $30.00
This ticketed event is $20 advance registration and $30 on-site registration. Join us for an interactive panel discussion on the state of engineering education as a formal academic discipline and projections for this field over the next five years. This breakfast of champions will feature champions of engineering education from institutions including Clemson, Purdue, Tufts, Utah State, and Virginia Tech. Note: You do not need to purchase a ticket if you do not want breakfast provided for you - please feel free to bring your own breakfast or to just join us for the discussion.

Moderated by: Matt Ohland, Purdue University and Matthew Verleger, Utah State University

There are currently 22 registrants interested in attending
Technical · Educational Research and Methods Division
Mon. June 27, 2011 7:00 AM to 8:30 AM
Room 114, Vancouver International Conference Centre
Session Description

Engineering education research conducted with participants from the K-12 community.

  1. Moderated by Dr. Anne Marie Spence
Papers Presented
  1. Analyzing Subject-Produced Drawings: The use of the Draw an Engineer Assessment in Context [view paper] Tirupalavanam G. Ganesh (Arizona State University)
  2. The Development of an Instructional and Assessment Tool From Student Work on a Model-Eliciting Activity [view paper] Micah S. Stohlmann (University of Minnesota), Tamara J. Moore (University of Minnesota, Twin Cities), Young Rae Kim (University of Minnesota, Twin Cities), Mi Sun Park (University of Minnesota, Twin Cities), and Gillian Roehrig (University of Minnesota)
  3. Are We Growing the Next Generation of Bioengineers? An Ecological Assessment of One BioInstitute Summer Camp [view paper] Robin Guill Liles (North Carolina Agricultural and Technical State University), Courtney Lambeth (North Carolina A&T State University), Dr. Cindy Waters (North Carolina A&T State University (Eng)), and Devdas M. Pai (North Carolina A&T State University (Eng))
  4. The Nature of Teacher Knowledge of and Self-Efficacy in Teaching Engineering Design in a STOMP Classroom [view paper] Elsa Head (Tufts University) and Dr. Morgan M. Hynes (Tufts University)
There are currently 31 registrants interested in attending
Business · Electrical and Computer Division
Mon. June 27, 2011 7:00 AM to 8:30 AM
Room 201, Vancouver International Conference Centre
Session Description

At the annual business meeting of the Electrical and Computer Engineering Division, we will address issues of concern to our membership and elect next year's officers.

There are currently 19 registrants interested in attending
Business · Engineering Deans Council
Mon. June 27, 2011 7:00 AM to 8:30 AM
East Building - Room 11, Vancouver International Conference Centre
Session Description

Meeting of the Engineering Deans Public Policy Committee. Members only - by invitation only.

There are currently 10 registrants interested in attending

Registration closed

» Online registration is currently closed